Advanced Simulation and control of tribology in metal forming Processes for the North-West European Consumer goods and Transport sectors (ASPECT)


Project Summary

 

The aim of ASPECT is to develop advanced simulations technology to account for temperature increase and adaptive control systems to adjust the machine settings during the start-up of the production line.

Top research capabilities on tribological simulations and process control are available in the Netherlands and Switzerland, while Germany, France and the Netherlands are hosting a high number of automotive, aerospace and consumer goods manufacturing lines.

The change ASPECT will produce:

  • up to 40% increase in productivity for manufacturing OEMs;
  • 20-25% reduction of maintenance costs;
  • new design capabilities for metal alloys and lubricants.

The novelty of ASPECT:

  • prediction and control of tribological conditions by developing both accurate and computationally-efficient simulations;
  • robustness of the results demonstrated across two representative industrial sectors - automotive parts and personal care consumer products - covering both sides of the dimensional range;
  • whole supply chain involved right from the project implementation phase.

The outputs:

  • advanced tribological simulations;
  • robust and fully-automated forming processes demonstrated in two existing forming lines;
  • new joint demo facility with open access for training and education;
  • dissemination via relevant manufacturing clusters in NWE area;
  • guidelines to improve the material, tool and lubricant design.

The long term benefits: 

  • advanced products with complex shapes and based on advanced materials at competitive prices;
  • highly skilled jobs available at manufacturing plants in Europe;
  • customer satisfaction ensuring competitiveness of the NWE industry.  

ASPECT Movie

Project Partners

Lead partner

Organisation Address Email Website
Stichting Materials Innovation Institute 1 Van der Burghweg
Delft
2628 CS
Netherlands
i.degeratu@m2i.nl www.m2i.nl
Name Contact Name Email Country
Triboform Engineering BV Netherlands
ESI GROUP France
Falex Tribology NV Belgium
Universiteit Twente Netherlands
Zeller+Gmelin GmbH & Co. KG Germany
Tata Steel Nederland Technology BV Netherlands
INSPIRE AG FUR MECHATRONISCHE PRODUKTIONSSYSTEME UND FERTIGUNGSTECHNIK Switzerland
ADAM OPEL AG Germany
PHILIPS CONSUMER LIFESTYLE B.V. Netherlands
AutomotiveNL Netherlands
Pôle EMC2 France
Dr. FILZEK TRIBOtech Germany

NEWS


Practical training "Friction in Sheet Metal Forming"

Posted on

A practical training on “Friction in Sheet Metal Forming” will take place on 26th March 2019, at the Technical University of Darmstadt, Germany. The training is organised by the ASPECT partners Filzek Tribotech, Triboform and ESI Software Group, who will demonstrate state-of-the art approaches to determine friction in sheet metal forming processes. During the practical training, the influence of temperature increase on friction will be demonstrated in experimental forming operations, as well as on finite element simulations. Read More

Coming up: training opportunities on Tribology in Sheet Metal Forming

Posted on

The INTERREG project ASPECT will host two different kind of trainings on tribology. The first event is a practical training on “Friction in Sheet Metal Forming Process” on 16 October 2018 at the Technical University of Darmstadt. The second event is a two day course on “Fundamentals of Tribology in Sheet Metal Forming” on 19 and 20 November 2018 at the University of Twente. Read More


Work Package T1. - Tribological modelling and simulations

WP leader: ESI GROUP

 

Partners involved:

M2i; Triboform; ESI; Falex; UT; Z&G; Tata Steel; inspire; Opel; Philips; FILZEK.

 

 

 

 

Description of work: A micro-mechanics-based friction model will be developed by UT with support from Triboform, to predict the local friction conditions between the lubricated work piece and forming tool at elevated temperatures. The extended friction model will be calibrated with relevant experiments (Falex and FILZEK - lab scale; Tata Steel - component scale). Z&G will provide input on lubricant properties and will actively take part in the experimental plan led by Tata Steel with the contribution of Falex and FILZEK. The metamodels resulted will be applied in two Finite Element simulation packages: PAM-STAMP (by Triboform and ESI, assisted by Opel) and MARC (by M2i, assisted by Philips) allowing thermo-mechanical coupled deep drawing simulations. A balance between computational efficiency and accuracy will be sought after (ESI, M2i). A metamodel for the machine settings will also be developed by inspire, based on a number of thermo-mechanical coupled FE simulations, to allow the adjustment of the machinery settings.

 

The output of this Work Package will consist of four technologies:

  1. Friction model including the effect of transient temperatures, validated at lab (TRL 5) and pre-industrial (TRL 6) scales;
  2. Built-in capability in a software (TriboForm) to calculate friction based on temperature inputs; 3. Sheet metal forming simulation code;
  3. Computationally-efficient algorithm to simulate the transient temperature effect, to be eventually embedded in two commercial software codes (PAM-STAMP and MARC).

 

Cooperation in North-West Europe:

The temperature-dependent material properties will provide the data for further integration of temperature dependence into the Triboform software. While the software has a built-in capability to deal with variable tribological conditions, the temperature effects were hitherto not dealt with, and these represent the main innovative step of the ASPECT project. The output requires a strong collaboration between the research organizations and the participating SMEs. The "experimentalists" (Falex, FILZEK), will work closely with the "modellers" (Triboform) to develop and validate a tribological model able to capture the variation of friction with temperature during forming. The model will be further implemented in industrial codes and validated at component (pre-industrial) level. The material producers (Tata Steel, Z&G) and the end-users (Opel, Philips) will contribute their knowledge on materials and forming processes, respectively.

WP T.2: Adaptive process control

WP leader: inspire AG

 

Partners involved:

M2i; Triboform; ESI; UT; Tata Steel; Opel; Philips; FILZEK.

 

 

 

 

Description of work:

The numerical tools developed will be used to determine optimal process parameters, not only for the steady state, but also for the transient part of the process to account for the temperature effect on part quality. An adaptive control strategy will adjust the process parameters within the optimal predicted range. This will be done by linking measurements of the local temperatures during the transient process with the actuators. For instance, the system should be able to automatically adapt the required blankholder force, based on the temperatures measured with sensors in the tool. This adaptation needs to be done in real time, using a metamodel derived from the earlier simulations. By doing so, the effect of temperature during start-up is suppressed, directly enabling stable and zero failure production.

A sensor technique will be developed by inspire to measure all relevant parameters influencing the forming process. An adaptive control system will be designed using a priori knowledge from numerical simulations and in-line measured data to adjust the process to the instantaneous conditions (inspire). Finally, the sensor technique and control system will be integrated in the stamping line (inspire, Opel, Philips), where the working principle will be validated during the transient part of the process at industrially-relevant level (TRL 6-7 at Opel and Philips). Tata Steel will provide expert knowledge of material behaviour. UT, Triboform, FILZEK, ESI and M2i will be involved with a consultative role in the definition of the tool control strategy.

 

The output of this Work Package will be a tool control system that will enable the adjustment of the process conditions based on temperature-dependent friction inputs.

 

Cooperation in North West Europe:

inspire AG from Switzerland, the European leader in control technology, will cooperate with the Dutch and German partners in the development of a robust and efficient control system. Opel and Philips will contribute on connecting the data acquisition hardware to the stamping line. The system will use the machine settings of the stamping line, thereby requiring less additional hardware, and making it easy to use by the machine operators. Internal training will take place at Opel and Philips on the implementation of the control system. The success of the control system will be documented by means of a report and video, made available on this website. The public demonstrator facility at FILZEK will disseminate the results via invited lectures from inspire.

 

WP T.3: Piloting

WP leader: ESI GROUP

 

Partners involved:

M2i; Triboform; ESI; Falex; UT; Z&G; Tata Steel; inspire; Opel; Philips; FILZEK.

 

 

 

 

Description of work: The numerically predicted temperatures and the process windows for sheet forming processes based on these temperatures will be used for the evaluation of the correct parameter settings for industrial sheet forming processes. The demonstration of the model-based control will take place for two sheet metal forming processes (deep drawing) in which the temperature plays an important role on the friction effects and on the process performance during stamping:

  1. Forming process for Automotive car parts, at Opel;
  2. Forming process representative for small components in Consumer products, at Philips.

 

 The output of this Work Package is a holistic approach of virtual design and real-time control system

Demonstrated for two reference cases at industrially-relevant level

 

Cooperation in North-West Europe:

Opel and Philips will implement and run the demonstrators; inspire will connect the sensors to the unit for signal process and to the press control. The main research partners (UT, M2i and Triboform) and ESI will participate as observers, to get insights on iterative improvement of the tribological model. Falex and FILZEK will be involved in the preliminary validation steps on the demonstrator lines. Tata Steel and Z&G will contribute knowledge on materials.

The knowledge will be brought in the operation of the public demonstrator at FILZEK (WP LTE - Long term effects), which is a long-term activity meant for the education and training of the tribological and forming engineering community in the EU.

Events


EuroBLECH 2018

, Bad Bollen, Germany

EuroBLECH - 25th International Sheet Metal Working Technology Exhibition (EFB Conference for Sheet Metal Forming). Trend for digitization boosts economic outlook for the sheet metal working industry. The participants will get an overview of the latest technical developments in sheet metal processing and investment opportunities in new production equipment.
Read More

Euro Friction Wear and Wear Protection 2017

, Ettlingen, Germany

European Symposium on Friction, Wear, Wear Protection and Related Areas . The 2017 Friction, Wear and Wear protection symposium focuses on the latest developments in materials and coatings development for ultra-low friction and wear, as well as friction materials, polymers and PMC’s. Since 2008, it is held every three year under the auspices of the technical committee „Materials aspects of tribology and machining“ of the German materials society, DGM.
Read More


ASPECT survey on tribological effects during sheet metal forming

A survey was sent to over 2.000 contacts reuniting a selection of relevant contacts from the networks of the individual partners. Two rounds were organised, in sem. IV-2016 and a follow-up in sem. I 2018. 

Between October 2016 and March 2018 a total of 144 unique surveys have been completed. Most organizations that filled out the survey are working in the industry (61%), of which 44% are large enterprises and 17% are SME’s. Overall 25% of the respondent are working at an university. None of the respondents are cluster organizations. After the sector ‘Technical universities and research institutes’ (N=55), the most respondents are working in material processing (steel, N=43). A significant number of respondents have selected ‘Other’, which then have been specified as material development organizations, and engineering services.

Most organizations are equally interested in problems with wear (24%), lubrication (23%) and the relationship between friction and process conditions (23%). Also problems such as surface texture, contact pressure, forming speed, consideration in the simulation and how large are the influences of the individual parameters are of interest of several organizations (3%).

Of all 144 respondents, a slight minority (N=70; 49%) evaluates the required machine settings for metal forming with numerical simulations. Seventy-four respondents (51%) have indicated not to evaluate the settings. The respondents who do evaluate machine settings for metal forming are using many different software. Mostly used is AutoForm (25%), followed by Abaqus (18%), LS Dyna (17%) and PAM STAMP (12%).

Communication Toolkit

Share this

Tweet Share